2N® SIP Audio Converter

IP Paging and More

2N® SIP Speaker has become 2N® SIP Audio Converter.

Providing many useful functions, the 2N® SIP Audio Converter delivers IP paging within businesses, schools, public spaces, and anywhere a data network is available. 2N® SIP Audio Converter can be used with a dedicated loudspeaker to provide simple PA announcements, setup with other 2N® SIP Audio Converter units for zoned paging, or interfaced with your legacy analog amplifier to IP-enable older equipment. When interfaced with an external microphone, the 2N® SIP Audio Converter provides clear and reliable 2-way audio. 2N® SIP Audio Converter supports both input and output relays allowing you to exchange IP audio and provide access control capabilities within your unlimited reach. Using SIP protocol you can page to all 2N® SIP Audio Converters simultaneously, to specific zones, and to individual devices.  Based on various triggers, 2N® SIP Audio Converter units can initiate outbound calls using pre-configured numbers stored on each unit (i.e. button press, motion detection, simple relay closure, etc.).


  • Effective public address system
  • Simple integration with your infrastructure
  • Powerful built-in amplifier
  • Input for external microphone
  • Utilization of existing LAN/WAN network
  • Web interface for configuration
  • Remote control

PRODUCT LEAFLETDOWNLOAD SECTION
btn-warranty
btn-cisco
2N_SIP_Audio_Converter_main

Dimensions and weight – standalone unit 2N® SIP Audio Converter
Dimensions: 105 x 34 x 86 mm
Dimensions (with L-profiles): 130 x 34 x 86 mm
Weight: 10 oz.


Amplifier parameters
Output of power amplifier: 4 terminals on rear panel, STEREO/MONO with auto detection
Speaker impedance: 4-8Ω
Amplifier performance: Up to 2x10W depending on connection
Frequency range: 20Hz – 20kHz (+/- 0.5dB)
Harmonic distortion: 0.05% @ 1kHz
Signal to noise ratio: 91dB

Power
External power supply: 12V DC / 1.8A
LAN power supply: PoE IEEE 802.3af


Interface
Status signal: 3x RG LED on front panel
Local control: 3x Button on front panel
Remote control: 1x Infrared detector on front panel
LAN connection: RJ-45 connector on rear panel, 10/100BASE-TX with Auto-MDIX function
Earphone/line out: 1x STEREO 3.5mm jack on front panel
Microphone/line out: 1x STEREO 3.5mm jack on front panel

Connected warehouses

Using your in-house phone system (PBX), you can now provide directed pages to particular areas of your building, even those where telephones were not previously located. Additionally, you can provide pages to zones or the entire warehouse. Further, pages can be provided over the corporate WAN to warehouses in other locations.

2N_SIP_Speaker_schema_zapojeni_EN

2N® SIP Audio Converter

914401E
2N® SIP Audio Converter Standalone box
914490E
2N® SIP Audio Converter Standalone box, Loudspeaker & Mic
914420E
2N® SIP Audio Converter – Loudspeaker Set, wall mounted
914430E
2N® SIP Audio Converter – Loudspeaker Set, flush mounted

Licences

914407E
2N® SIP Audio Converter – Informacast License

Presentation case

914402E
2N® SIP Audio Converter Presentation Case