Skip to Content
2N

2N® Access Unit Bluetooth

An IP access control unit that lets users open a door using Bluetooth technology (BLE) and a smartphone or tablet. All you need is the 2N® Mobile Key installed on your mobile device. The 2N® Access Unit Bluetooth also supports two-factor user identification and is designed for locations with high security levels.

  • Mobile credentials for free
  • Adjustable range for opening doors
  • Simple pairing process
Request information Where to buy
About

Features & Benefits

  • Various modes for opening doors
    Choose whether the user has to have their phone in their hand to open the door and open it via the application, or whether they can leave their phone in their pocket and open it by simply touching the reader.
  • MOBILE CREDENTIALS ARE FREE
    Unlike our competitors, 2N offers free mobile credentials. Other providers may charge you $6 to $10 per each credentialed user’s ‘virtual card.’ Simply install the 2N app and use its convenience and safety without further fees!
  • Security comparable with internet banking
    Thanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N® Mobile Key application, your access details cannot be misused.
  • 2N® Remote Configuration
    Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
  • Adjustable communications distance
    Set the mobile telephone’s range for opening doors according to the type of installation – long distance for garage entry or short distance for passing through turnstiles.
  • Two-factor authentication
    For an extra level of security in guarded areas, for example, outside regular business hours, two-factor authentication can be set requiring users to confirm their identity by combining one mode of door opening with a PIN code entered in the application.
  • Simple installation
    A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
  • Administration via web interface
    Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • Tamper protection
    2N® Access Unit Bluetooth is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
  • Monitoring entrances and exits
    Other expansion modules (e.g. an exit Bluetooth module, RFID reader, or keypad etc.) can be connected to the 2N® Access Unit Bluetooth, allowing you to secure a door easily from both sides.
  • Indoor and outdoor use
    Thanks to its mechanical properties, the 2N access control unit is designed for either indoor or outdoor installation.
  • Don’t pay for new RFID cards
    Thanks to the 2N® Access Unit Bluetooth and the 2N® Mobile Key application, you no longer need to pay for each new or replaced RFID card. Our application replaces these cards and is free of charge.
  • Simple pairing process
    You simply pair your mobile telephone with the access control unit in just three steps. To pair several units at once, you can use 2N® Access Commander.
Show more
"For our client , the manufacturing company AMETIC GROUP Ltd., we deployed the IP access control units and the 2N® Access Commander access control system to resolve employee access to restricted areas and provide assessment of attendance records."
"For our project with Kempinski hotel we used 2N® IP Verso intercoms, 2N® Indoor Touch units and IP access control units. These solutions were used for apartments, public areas and back of house zones, like offices. Thanks to 2N compatibility we are using an online solution and provide integration with local BMS system through API."

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Bluetooth reader
Version: compatible with Bluetooth 4.0 or higher (BLE)
Range: Adjustable (short ~ 1.64 ft, medium ~ 6.56 ft, long ~ up to 32.81 ft)
Security: RSA-1024 and AES-128 encryption
RX sensitivity: up to -93dBm
Mobile application support
Android 6.0 and higher, iOS 11.0 and higher
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more
Typical Usage

2N IP Access Control Units Introduction

Get to know the features, capabilities and unique benefits of 2N IP access control units.
Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection in Office Complex

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Bluetooth reader
Version: compatible with Bluetooth 4.0 or higher (BLE)
Range: Adjustable (short ~ 1.64 ft, medium ~ 6.56 ft, long ~ up to 32.81 ft)
Security: RSA-1024 and AES-128 encryption
RX sensitivity: up to -93dBm
Mobile application support
Android 6.0 and higher, iOS 11.0 and higher
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 01287-001 (nickel) / 01288-001 (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 01278-001 (nickel) / 01279-001 (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 01284-001 Learn more
Backplate – 1 Module Order No.: 01293-001 Learn more
Gang Plate - 1 Module Order No.: 01524-001 Learn more
Connecting Cable with RJ45 Connector Order No.: 01371-001 Learn more

Extension Modules

Fingerprint Reader Order No.: 01276-001 Learn more
Keypad Order No.: 01253-001 (nickel) / 01254-001 (black) Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01639-001 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01638-001 Learn more
Bluetooth Reader Order No.: 01266-001 Learn more
Touch Keypad Order No.: 01277-001 Learn more
RFID Card Reader 125kHz Order No.: 01255-001 Learn more
RFID Card Reader 13.56MHz NFC Order No.: 01262-001 Learn more
Touch Display Order No.: 01275-001 Learn more
I/O Module Order No.: 01257-001 Learn more
Wiegand Module Order No.: 01259-001 Learn more
Extension Cable 1m Order No.: 01267-001 Learn more
Extension Cable 3m Order No.: 01268-001 Learn more
Extension Cable 5m Order No.: 01269-001 Learn more

Other Accessories

External IP Relay - 1 Output, 1 Input Order No.: 01397-001 Learn more
Magnetic Door Contact Order No.: 01388-001 Learn more
2N® 2Wire Order No.: 01404-001 Learn more
Security Relay Order No.: 01386-001 Learn more
External Bluetooth Reader (USB) Order No.: 01402-001 Learn more
AXIS Lift Relay Order No.: 0820-001 Learn more

Power Supply

PoE Injector Order No.: 01403-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • Various modes for opening doors
    Choose whether the user has to have their phone in their hand to open the door and open it via the application, or whether they can leave their phone in their pocket and open it by simply touching the reader.
  • MOBILE CREDENTIALS ARE FREE
    Unlike our competitors, 2N offers free mobile credentials. Other providers may charge you $6 to $10 per each credentialed user’s ‘virtual card.’ Simply install the 2N app and use its convenience and safety without further fees!
  • Security comparable with internet banking
    Thanks to Bluetooth v4 (BLE) technology and encrypted communication between the access control unit and the 2N® Mobile Key application, your access details cannot be misused.
  • 2N® Remote Configuration
    Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
  • Adjustable communications distance
    Set the mobile telephone’s range for opening doors according to the type of installation – long distance for garage entry or short distance for passing through turnstiles.
  • Two-factor authentication
    For an extra level of security in guarded areas, for example, outside regular business hours, two-factor authentication can be set requiring users to confirm their identity by combining one mode of door opening with a PIN code entered in the application.
  • Simple installation
    A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
  • Administration via web interface
    Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • Tamper protection
    2N® Access Unit Bluetooth is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
  • Monitoring entrances and exits
    Other expansion modules (e.g. an exit Bluetooth module, RFID reader, or keypad etc.) can be connected to the 2N® Access Unit Bluetooth, allowing you to secure a door easily from both sides.
  • Indoor and outdoor use
    Thanks to its mechanical properties, the 2N access control unit is designed for either indoor or outdoor installation.
  • Don’t pay for new RFID cards
    Thanks to the 2N® Access Unit Bluetooth and the 2N® Mobile Key application, you no longer need to pay for each new or replaced RFID card. Our application replaces these cards and is free of charge.
  • Simple pairing process
    You simply pair your mobile telephone with the access control unit in just three steps. To pair several units at once, you can use 2N® Access Commander.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector
Customer Success Stories
An Intelligent Access System from 2N Is Now Protecting a School Building
The school building in Prague-Troja is used by three institutions – an elementary school, a high-school and the local municipality offices. The building was using an outdated access system that began to malfunction and it was time for a change. The first requirement was to resolve access for all three institutions, enabling separated entry points and creating individual zones and restrictions related to the time of day.

„The 2N access system ensures quality protection for our school, yet the use and administration is simple. The new video intercoms are a great help, as well as registrations using RFID cards that each student or visitor has in their wallet.“
Download the story

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Bluetooth reader
Version: compatible with Bluetooth 4.0 or higher (BLE)
Range: Adjustable (short ~ 1.64 ft, medium ~ 6.56 ft, long ~ up to 32.81 ft)
Security: RSA-1024 and AES-128 encryption
RX sensitivity: up to -93dBm
Mobile application support
Android 6.0 and higher, iOS 11.0 and higher
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing documentation
Request information