2N® Access Unit Fingerprint Reader
An IP access control unit equipped with fingerprint reader. Thanks to its optical sensor, it provides maximum security, high reliability, and rapid fingerprint reading response. It works on indoor and outdoor installations under any weather conditions. To add a user’s fingerprint, you currently must use an external USB reader.
- Reliable optical technology
- Innovative and functional design
- False fingerprint detection
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
RELIABLE OPTICAL TECHNOLOGYThe fingerprint reader uses optical fingerprinting technology to read a fingerprint, ensuring reliable identification of the user when their finger is first applied to the reader.
-
INNOVATIVE AND FUNCTIONAL DESIGNThe access control unit is designed so that you can simply place your finger on the sensor without the need to press it down unnaturally.
-
FALSE FINGERPRINT DETECTIONA fingerprint is a user’s unique identifier which cannot be stolen, but can be copied. Our access control unit can detect such fake fingerprints.
-
2N® Remote ConfigurationSave time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
-
ADDING NEW FINGERPRINTSLoading a new fingerprint is crucially important for correct evaluation during real use. For this reason, the user must have their finger scanned three consecutive times to guarantee an optimum match.
-
SIMPLE INSTALLATIONA single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
-
WEB INTERFACE ADMINISTRATIONSimply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
-
Tamper protection2N® Access Unit Fingerprint Reader is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
-
MULTI-FACTOR AUTHENTICATIONOther expansion modules (an RFID reader, keypad, or Bluetooth) can be connected to the 2N® Access Unit Fingerprint Reader ensuring dual identification of users in areas with a high level of security.
-
SENSOR RESISTANT TO EXTERNAL FACTORSThanks to its mechanical properties, the fingerprint reader is designed for both indoor and outdoor installation.
-
ACOUSTIC AND VISUAL SIGNALLINGAcoustic and visual LED signalling located directly above the sensor indicate the fingerprint reader’s status.
Show more
Technical Parameters
| Audio | |
| Speaker: | 0.8 W / 8 Ω |
| Interfaces | |
| Power supply: | 12 V ±15% / 2A DC or PoE |
| PoE: | per standard 802.3af (Class 0 - 12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45 |
| Recommended wiring: | Cat5e or better |
| Passive switch: | NC/NO contacts, max 30 V 1 A AC/DC |
| Active switch output: | 8 to 12 V DC / max 550 mA |
| Inputs: | 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC) |
| Fingerprint reader | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Ambient light suppression: | also works in direct sunlight |
| Signalling: | acoustic and multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32 mm |
| Certification: | certified according to FBI standard |
| Expansion modules | |
| Modules from the intercom 2N® IP Verso: | RFID card reader (125 kHz; 13.56 MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported |
| Mechanical properties | |
| Frame: | Rugged zinc die-cast with surface finish |
| Operating temperature: | -20 °C – 55 °C |
| Operating relative humidity: | 10 %-95 % (non-condensing) |
| Storage temperature: | -20 °C – 60 °C |
| Coverage level: | IP54 |
| Mechanical resilience: | IK08 |
| Dimensions: | Frame for surface mounting: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Frame for recessing in wall: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Box for recessing in wall (dimensions of minimum hole in wall): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration) |
Show more
Typical Usage
2N Access Units Introduction
Get to know the features, capabilities and unique benefits of 2N Access Units.
Watch the video Technical area 
Case Study
Example of Typical Connection in Office Complex
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Audio | |
| Speaker: | 0.8 W / 8 Ω |
| Interfaces | |
| Power supply: | 12 V ±15% / 2A DC or PoE |
| PoE: | per standard 802.3af (Class 0 - 12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45 |
| Recommended wiring: | Cat5e or better |
| Passive switch: | NC/NO contacts, max 30 V 1 A AC/DC |
| Active switch output: | 8 to 12 V DC / max 550 mA |
| Inputs: | 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC) |
| Fingerprint reader | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Ambient light suppression: | also works in direct sunlight |
| Signalling: | acoustic and multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32 mm |
| Certification: | certified according to FBI standard |
| Expansion modules | |
| Modules from the intercom 2N® IP Verso: | RFID card reader (125 kHz; 13.56 MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported |
| Mechanical properties | |
| Frame: | Rugged zinc die-cast with surface finish |
| Operating temperature: | -20 °C – 55 °C |
| Operating relative humidity: | 10 %-95 % (non-condensing) |
| Storage temperature: | -20 °C – 60 °C |
| Coverage level: | IP54 |
| Mechanical resilience: | IK08 |
| Dimensions: | Frame for surface mounting: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Frame for recessing in wall: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Box for recessing in wall (dimensions of minimum hole in wall): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration) |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area 
Download the story
Request information Selling Propositions
- RELIABLE OPTICAL TECHNOLOGYThe fingerprint reader uses optical fingerprinting technology to read a fingerprint, ensuring reliable identification of the user when their finger is first applied to the reader.
- INNOVATIVE AND FUNCTIONAL DESIGNThe access control unit is designed so that you can simply place your finger on the sensor without the need to press it down unnaturally.
- FALSE FINGERPRINT DETECTIONA fingerprint is a user’s unique identifier which cannot be stolen, but can be copied. Our access control unit can detect such fake fingerprints.
- 2N® Remote ConfigurationSave time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
- ADDING NEW FINGERPRINTSLoading a new fingerprint is crucially important for correct evaluation during real use. For this reason, the user must have their finger scanned three consecutive times to guarantee an optimum match.
- SIMPLE INSTALLATIONA single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
- WEB INTERFACE ADMINISTRATIONSimply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
- Tamper protection2N® Access Unit Fingerprint Reader is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
- MULTI-FACTOR AUTHENTICATIONOther expansion modules (an RFID reader, keypad, or Bluetooth) can be connected to the 2N® Access Unit Fingerprint Reader ensuring dual identification of users in areas with a high level of security.
- SENSOR RESISTANT TO EXTERNAL FACTORSThanks to its mechanical properties, the fingerprint reader is designed for both indoor and outdoor installation.
- ACOUSTIC AND VISUAL SIGNALLINGAcoustic and visual LED signalling located directly above the sensor indicate the fingerprint reader’s status.
Show more
Customer Success Stories
An Intelligent Access System from 2N Is Now Protecting a School Building
The school building in Prague-Troja is used by three institutions – an elementary school, a high-school and the local municipality offices. The building was using an outdated access system that began to malfunction and it was time for a change. The first requirement was to resolve access for all three institutions, enabling separated entry points and creating individual zones and restrictions related to the time of day.
„The 2N access system ensures quality protection for our school, yet the use and administration is simple. The new video intercoms are a great help, as well as registrations using RFID cards that each student or visitor has in their wallet.“
Radim Jendřejas
Technical Parameters
| Audio | |
| Speaker: | 0.8 W / 8 Ω |
| Interfaces | |
| Power supply: | 12 V ±15% / 2A DC or PoE |
| PoE: | per standard 802.3af (Class 0 - 12.95W) |
| LAN: | 10/100BASE-TX with Auto-MDIX, terminal block or pigtail RJ-45 |
| Recommended wiring: | Cat5e or better |
| Passive switch: | NC/NO contacts, max 30 V 1 A AC/DC |
| Active switch output: | 8 to 12 V DC / max 550 mA |
| Inputs: | 3 inputs – can be used in passive or active mode (-30 V to + 30 V DC) |
| Fingerprint reader | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Ambient light suppression: | also works in direct sunlight |
| Signalling: | acoustic and multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32 mm |
| Certification: | certified according to FBI standard |
| Expansion modules | |
| Modules from the intercom 2N® IP Verso: | RFID card reader (125 kHz; 13.56 MHz), fingerprint reader, Bluetooth module, keypad, touch display, I/O module, Wiegand, etc. are supported |
| Mechanical properties | |
| Frame: | Rugged zinc die-cast with surface finish |
| Operating temperature: | -20 °C – 55 °C |
| Operating relative humidity: | 10 %-95 % (non-condensing) |
| Storage temperature: | -20 °C – 60 °C |
| Coverage level: | IP54 |
| Mechanical resilience: | IK08 |
| Dimensions: | Frame for surface mounting: |
| - 1 module: 107 (W) x 130 (H) x 28 (D) mm | |
| Frame for recessing in wall: | |
| - 1 module: 130 (W) x 153 (H) x 5 (D) mm | |
| Box for recessing in wall (dimensions of minimum hole in wall): | |
| - 1 module: 108 (W) x 131 (H) x 45 (D) mm | |
| Weight: | max gross weight: 2 kg / max net weight: 0.5 kg (depends on configuration) |
Show more
