Skip to Content
2N

2N® Access Unit Touch Keypad

This IP access control unit equipped with a capacitive touch keypad reliably registers and evaluates each touch. After entering the correct access PIN, the unit opens the door. Each user can have their own access code, or several users can share one PIN. The unit is designed for indoor or outdoor installation.

  • Capacitive touch technology
  • Adjustable backlighting brightness
  • Silent alarm activation
Request information Where to buy
About

Features & Benefits

  • REGULAR AUTOMATIC CALIBRATION
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • GUARANTEED VISIBILITY EVEN AT NIGHT
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • SILENT ALARM
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • 2N® Remote Configuration
    Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
  • Tamper protection
    2N® Access Unit Touch Keypad is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
  • NOTIFICATION OF INCORRECT PIN ENTRY
    If anybody enters an invalid PIN code to gain access to the building several times in a row, the 2N® Access Unit Touch Keypad immediately sends notification to the administrator and blocks the keypad.
  • SECURITY RELAY
    This simple, additional device prevents interference with the lock connected to the access control unit to prevent unauthorised entry into the building.
  • SIMPLE INSTALLATION
    A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
  • WEB INTERFACE ADMINISTRATION
    Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • A UNIT PACKED WITH SMART FEATURES
    The 2N® Access Unit Touch Keypad combines the functions of a traditional controller and access keypad, which significantly reduces installation, cabling, and maintenance costs.
  • ACOUSTIC AND VISUAL SIGNALLING
    Each touch on the keypad and evaluation of the entered PIN is signalled acoustically. Acceptance or rejection of the PIN is also signalled visually.
Show more
"For our client , the manufacturing company AMETIC GROUP Ltd., we deployed the IP access control units and the 2N® Access Commander access control system to resolve employee access to restricted areas and provide assessment of attendance records."
"For our project with Kempinski hotel we used 2N® IP Verso intercoms, 2N® Indoor Touch units and IP access control units. These solutions were used for apartments, public areas and back of house zones, like offices. Thanks to 2N compatibility we are using an online solution and provide integration with local BMS system through API."

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more
Typical Usage

2N IP Access Control Units Introduction

Get to know the features, capabilities and unique benefits of 2N IP access control units.
Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection in Office Complex

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 01287-001 (nickel) / 01288-001 (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 01278-001 (nickel) / 01279-001 (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 01284-001 Learn more
Backplate – 1 Module Order No.: 01293-001 Learn more
Gang Plate - 1 Module Order No.: 01524-001 Learn more
Connecting Cable with RJ45 Connector Order No.: 01371-001 Learn more

Extension Modules

Fingerprint Reader Order No.: 01276-001 Learn more
Keypad Order No.: 01253-001 (nickel) / 01254-001 (black) Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01639-001 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01638-001 Learn more
Bluetooth Reader Order No.: 01266-001 Learn more
Touch Keypad Order No.: 01277-001 Learn more
RFID Card Reader 125kHz Order No.: 01255-001 Learn more
RFID Card Reader 13.56MHz NFC Order No.: 01262-001 Learn more
Touch Display Order No.: 01275-001 Learn more
I/O Module Order No.: 01257-001 Learn more
Wiegand Module Order No.: 01259-001 Learn more
Extension Cable 1m Order No.: 01267-001 Learn more
Extension Cable 3m Order No.: 01268-001 Learn more
Extension Cable 5m Order No.: 01269-001 Learn more

Other Accessories

External IP Relay - 1 Output, 1 Input Order No.: 01397-001 Learn more
2N® 2Wire Order No.: 01404-001 Learn more
Magnetic Door Contact Order No.: 01388-001 Learn more
Security Relay Order No.: 01386-001 Learn more
AXIS A9188 Network I/O Relay Module for lifts Order No.: 0820-001 Learn more

Power Supply

PoE Injector Order No.: 01403-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • REGULAR AUTOMATIC CALIBRATION
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • GUARANTEED VISIBILITY EVEN AT NIGHT
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • SILENT ALARM
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • 2N® Remote Configuration
    Save time and money for onsite support thanks to our free service. Access all your devices remotely via secured cloud connection. Fastest response to your customers requests.
  • Tamper protection
    2N® Access Unit Touch Keypad is equipped with a mechanical protective switch. As soon as anyone attempts to damage the unit mechanically, the switch is activated and an alarm is set off.
  • NOTIFICATION OF INCORRECT PIN ENTRY
    If anybody enters an invalid PIN code to gain access to the building several times in a row, the 2N® Access Unit Touch Keypad immediately sends notification to the administrator and blocks the keypad.
  • SECURITY RELAY
    This simple, additional device prevents interference with the lock connected to the access control unit to prevent unauthorised entry into the building.
  • SIMPLE INSTALLATION
    A single ethernet cable, Power over Ethernet, and the option to connect a lock, exit button, or door contact directly to the unit make installation very simple.
  • WEB INTERFACE ADMINISTRATION
    Simply connect the access control unit to your LAN and everything can be set up via the intuitive web interface.
  • A UNIT PACKED WITH SMART FEATURES
    The 2N® Access Unit Touch Keypad combines the functions of a traditional controller and access keypad, which significantly reduces installation, cabling, and maintenance costs.
  • ACOUSTIC AND VISUAL SIGNALLING
    Each touch on the keypad and evaluation of the entered PIN is signalled acoustically. Acceptance or rejection of the PIN is also signalled visually.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector
Customer Success Stories
An Intelligent Access System from 2N Is Now Protecting a School Building
The school building in Prague-Troja is used by three institutions – an elementary school, a high-school and the local municipality offices. The building was using an outdated access system that began to malfunction and it was time for a change. The first requirement was to resolve access for all three institutions, enabling separated entry points and creating individual zones and restrictions related to the time of day.

„The 2N access system ensures quality protection for our school, yet the use and administration is simple. The new video intercoms are a great help, as well as registrations using RFID cards that each student or visitor has in their wallet.“
Download the story

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.213 (W) x 5.118 (H) x 1.102 (D) inch
Flush mounting frame:
- 1 module: 5.118 (W) x 6.024 (H) x 0.197 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.252 (W) x 5.157 (H) x 1.772 (D) inch
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing documentation
Request information