Skip to Content
2N

2N Access Unit 2.0

Do you need a good-looking access reader for your project? All the residents of luxury residences will be delighted with the 2N Access Unit 2.0. Select modern access with a mobile phone or fingerprint. Do you prefer conventional methods? We also offer an RFID card reader or keypad. Cannot decide? Select a combination of several methods in one device. But don’t look for controllers in our portfolio. They are already an integral part of every reader.

  • Ideal for residential projects
  • Fastest Bluetooth technology
  • You don’t need a controller
Show in 3D Where to buy
About

Features & Benefits

  • Ideal for residential projects
    Coordinate the design of the intercoms and readers. Offer the customer not only a problem-free access control system but also one that looks good. Select a black or nickel frame.
  • Fastest Bluetooth technology
    Opening the door with our WaveKey technology is quicker than swiping an RFID card. Move with the times and offer a fast, secure and convenient method of access.
  • You don’t need a controller
    Our readers are completely smart in their own right. Don’t waste time looking for a place to put the controller or getting lost in a clutter of cables.
  • Quick installation and remote administration
    You can manage installation in just 4 minutes. Click the UTP cable into place and connect the reader with the lock. Administer the system remotely via a secure cloud and save time on call-outs.
  • Flush mount or installation on glass
    A flush mounted reader protrudes 5 mm and looks elegant. You can, of course, also install it on a surface. And if you don’t want to drill into a wall, stick the reader to a glass surface.
  • Timeless solution
    Changes to a project will no longer catch you unaware. Add and remove hardware as you please. You can even come back to the old installation years later and add other products.
Show more

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
(2N® Access Unit Bluetooth has 3 inputs)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth Reader
Version: compatible with Bluetooth 5.0 LE
Range: adjustable (short ~ 0.5 yd, medium ~ 2 yd, long ~ up to 10 yd)
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to -93 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies: 125 kHz variant
13.56 MHz variant
125 kHz and 13.56 MHz variant
125 kHz: EM4100, EM4102, HID Prox
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Fingerprint Reader
Sensor: optical sensor protected by resistant glass
Reliability: algorithm for fake fingerprint detection
Resistance: resistant to water and dust
Signalling: acoustic and multicoloured LEDs
Sensing area: large with dimensions of 60 x 80 inch
Certification: certified according to FBI standard
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to + 140°F
(2N® Access Unit 2.0 Fingerprint Reader -4°F to +131°F)
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4,21 (W) x 5,11 (H) x 1,10 (D) inch
Flush mounting frame:
- 1 module: 5,11 (W) x 6,02 (H) x 0,19 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4,25 (W) x 5,15 (H) x 1,77 (D) inch
Weight: max 1,76 pounds
Cover rating: IP54 and IK08
Extension Modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Try out the 2N Project Designer

Simply enter your requirements and our intuitive project planning tool will help you choose the right products.

Typical Usage

2N Access Units 2.0 Introduction

Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Licenses

Find out the detailed description of product licensing policy.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
(2N® Access Unit Bluetooth has 3 inputs)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth Reader
Version: compatible with Bluetooth 5.0 LE
Range: adjustable (short ~ 0.5 yd, medium ~ 2 yd, long ~ up to 10 yd)
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to -93 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies: 125 kHz variant
13.56 MHz variant
125 kHz and 13.56 MHz variant
125 kHz: EM4100, EM4102, HID Prox
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Fingerprint Reader
Sensor: optical sensor protected by resistant glass
Reliability: algorithm for fake fingerprint detection
Resistance: resistant to water and dust
Signalling: acoustic and multicoloured LEDs
Sensing area: large with dimensions of 60 x 80 inch
Certification: certified according to FBI standard
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to + 140°F
(2N® Access Unit 2.0 Fingerprint Reader -4°F to +131°F)
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4,21 (W) x 5,11 (H) x 1,10 (D) inch
Flush mounting frame:
- 1 module: 5,11 (W) x 6,02 (H) x 0,19 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4,25 (W) x 5,15 (H) x 1,77 (D) inch
Weight: max 1,76 pounds
Cover rating: IP54 and IK08
Extension Modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 01287-001 (nickel) / 01288-001 (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 01278-001 (nickel) / 01279-001 (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 01284-001 Learn more
Backplate – 1 Module Order No.: 01293-001 Learn more
Gang Plate - 1 Module Order No.: 01524-001 Learn more
Connecting Cable with RJ45 Connector Order No.: 01371-001 Learn more

Extension Modules

Fingerprint Reader Order No.: 01276-001 Learn more
Keypad Order No.: 01253-001 (nickel) / 01254-001 (black) Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01639-001 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01638-001 Learn more
Bluetooth Reader Order No.: 01266-001 Learn more
Touch Keypad Order No.: 01277-001 Learn more
RFID Card Reader 125kHz Order No.: 02140-001 Learn more
Touch Display Order No.: 01275-001 Learn more
I/O Module Order No.: 01257-001 Learn more
Infopanel Order No.: 01252-001 Learn more
Wiegand Module Order No.: 01259-001 Learn more
Extension Cable 1m Order No.: 01267-001 Learn more
Extension Cable 3m Order No.: 01268-001 Learn more
Extension Cable 5m Order No.: 01269-001 Learn more

Other Accessories

Security Relay Order No.: 01386-001 Learn more
External IP Relay - 1 Output, 1 Input Order No.: 01397-001 Learn more
External IP relay - 4 Outputs, 0 Input Order No.: 01398-001 Learn more
Magnetic Door Contact Order No.: 01388-001 Learn more
NVT PoLRE LPC Switch (with 2 adapters) Order No.: 02318-001 Learn more
NVT PhyLink Adapter (pack of 6 adapters) Order No.: 02319-001 Learn more
2N® 2Wire Order No.: 01404-001 Learn more
EM4100 RFID Card, 125kHz Order No.: 01395-001 Learn more
Mifare Classic 1K RFID Card, 13.56MHz Order No.: 01384-001 Learn more
EM4100 RFID Key Fob, 125kHz Order No.: 01396-001 Learn more
Mifare Classic 1K RFID Key Fob, 13.56MHz Order No.: 01385-001 Learn more
External RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 01400-001 Learn more
External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 01527-001 Learn more
AXIS A9188 Network I/O Relay Module for lifts Order No.: 0820-001 Learn more
External Bluetooth Reader (USB) Order No.: 01402-001 Learn more

Power Supply

PoE Injector - without Cable Order No.: 01403-001 Learn more
PoE Injector - US Cable Order No.: 01403-001 Learn more

SW Applications
Sales Area

Selling Propositions

  • Ideal for residential projects
    Coordinate the design of the intercoms and readers. Offer the customer not only a problem-free access control system but also one that looks good. Select a black or nickel frame.
  • Fastest Bluetooth technology
    Opening the door with our WaveKey technology is quicker than swiping an RFID card. Move with the times and offer a fast, secure and convenient method of access.
  • You don’t need a controller
    Our readers are completely smart in their own right. Don’t waste time looking for a place to put the controller or getting lost in a clutter of cables.
  • Quick installation and remote administration
    You can manage installation in just 4 minutes. Click the UTP cable into place and connect the reader with the lock. Administer the system remotely via a secure cloud and save time on call-outs.
  • Flush mount or installation on glass
    A flush mounted reader protrudes 5 mm and looks elegant. You can, of course, also install it on a surface. And if you don’t want to drill into a wall, stick the reader to a glass surface.
  • Timeless solution
    Changes to a project will no longer catch you unaware. Add and remove hardware as you please. You can even come back to the old installation years later and add other products.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector
Customer Success Stories
Burlington House – an Award-Winning Project with 2N Technology
Would you like your project to be awarded prestigious WiredScore certification? The unique Burlington House residential project in Manchester already has it. And connectivity with 2N was a crucial factor. This pinnacle of modern urban housing has been awarded prestigious WiredScore certification for the very highest standard of smart living.

„The 2N access system ensures quality protection for our residential complex. As a system administrator, simplicity of use was my main focus. 2N Access Commander is a well-designed system that allows the status of devices in the access control system to be monitored in real time.“
Edite Muceniece
Download the story
Customer Success Stories
2N Access Control for Luxury Apartments
A building, once used as a hospital, in the centre of London was to be turned into 24 apartments. The building was intended for the high-end market, with requirements for luxury equipment and the latest technologies. Integration with a Control4 home automation systems and remote answering of calls from the door were a must. Finally, delivered by our partner CIE and installed by Imaginise, 2N products were implemented.

„I would certainly recommend the 2N system over the competition - it’s proved to have the scalability, the interface and the user-friendly applications that are second nature to people these days. It really is 21st Century technology.“
Download the story
Customer Success Stories
An Intelligent Access System from 2N Is Now Protecting a School Building
The school building in Prague-Troja is used by three institutions – an elementary school, a high-school and the local municipality offices. The building was using an outdated access system that began to malfunction and it was time for a change. The first requirement was to resolve access for all three institutions, enabling separated entry points and creating individual zones and restrictions related to the time of day.

„The 2N access system ensures quality protection for our school, yet the use and administration is simple. The new video intercoms are a great help, as well as registrations using RFID cards that each student or visitor has in their wallet.“
Download the story
Customer Success Stories
Sensitive Retrofit Installation in Historical Building
When our integration partner, the Italian company Due Esse – Domoiot, was asked to install modern access technologies in an elegant, 118-year old building in the centre of Milan, the brief was clear - increase access security, completely remove the use of keys, give the concierge more control, maintain the ancient character of the building.

„When we were choosing the access control system solution, we were interested in a solution which would enhance the security of the building. We also wanted a system with simple administering and nice design so that it fitted the character of this historical building. Crucially, we also needed a cost-efficient option. The 2N® IP Verso intercoms and 2N® Indoor Compact answering units met every one of these requirements.“
Stefano Albanesi
Download the story
Customer Success Stories
Securing Limited-Edition Project with Unlimited Luxury
Greenhill Park is a very exclusive new-built project. This pinnacle of taste consists of a total of 31 luxury apartments. Everything has been thought through in detail.

„For this luxurious project, we placed a big emphasis on the selection of components of the very highest quality, and on design. 2N’s products successfully met our challenging requirements through the comprehensiveness of the solution, and the award-winning product design.“
Kris Troonbeeck
Download the story
Customer Success Stories
Access Control for Casino
Located in the heart of Riga, Latvia, a new casino grew up. In order to secure the casino, a reliable access control system had to be installed. It had to cover entrances and create security zones within the establishment. Tracking an attendance of employees, user-friendliness and IP background of the system were a must. As a result, an integrator and our partner DTG chose an access control from 2N.

„We like to work with 2N, because their products and solutions are reliable and the management software is easy to operate. The fact that 2N can be integrated into Milestone and works with AXIS, is a real advantage for clients who think about such solution.“
Janis Lizanders
Download the story
Customer Success Stories
Luxury Residential Complex under the Protection of 2N
A luxury complex of five distinctive apartment buildings has been built not far from Prague, designed by one of the leading Czech architects. An integral part of this luxury is also the safety of residents and protection of their property. For this reason, one of the requirements was the ability to integrate the access control system with Home Automation systems and the option of further integration with third-party systems.

„2N products are an integral part of our “FlowBox” projects and installations due to their versatile configuration. We particularly appreciate the wide range of options offered by the application interface, which allows us to link access components with other technologies in our buildings. The result is a friendly and intuitive user environment.“
Download the story

Try out the 2N Project Designer

Simply enter your requirements and our intuitive project planning tool will help you choose the right products.

Technical Parameters

Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
(2N® Access Unit Bluetooth has terminal block or pigtail RJ-45)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
(2N® Access Unit Bluetooth has 3 inputs)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Bluetooth Reader
Version: compatible with Bluetooth 5.0 LE
Range: adjustable (short ~ 0.5 yd, medium ~ 2 yd, long ~ up to 10 yd)
Security: RSA-1024 and AES-128 encryption
RX sensitivity:
Mode:
up to -93 dBm
touch, tap in app
Mobile Application Support
Android 6.0 and higher, iOS 12.0 and higher
RFID Card Reader
Supported frequencies: 125 kHz variant
13.56 MHz variant
125 kHz and 13.56 MHz variant
125 kHz: EM4100, EM4102, HID Prox
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Fingerprint Reader
Sensor: optical sensor protected by resistant glass
Reliability: algorithm for fake fingerprint detection
Resistance: resistant to water and dust
Signalling: acoustic and multicoloured LEDs
Sensing area: large with dimensions of 60 x 80 inch
Certification: certified according to FBI standard
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to + 140°F
(2N® Access Unit 2.0 Fingerprint Reader -4°F to +131°F)
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4,21 (W) x 5,11 (H) x 1,10 (D) inch
Flush mounting frame:
- 1 module: 5,11 (W) x 6,02 (H) x 0,19 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4,25 (W) x 5,15 (H) x 1,77 (D) inch
Weight: max 1,76 pounds
Cover rating: IP54 and IK08
Extension Modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing documentation
Request information