Skip to Content
2N

2N® Access Unit 2.0 RFID

The 2N® Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows the simultaneous use of older 125kHz cards and new, secure 13.56MHz smart cards. Its greatest benefits are simple installation using a single ethernet cable, remote administration and hardware and software security.

  • Multi-frequency RFID card reader
  • Minimum wiring requirements
  • Same design as IP intercoms
Request information Where to buy
About

Features & Benefits

  • Multi-frequency RFID card reader
    The combined RFID reader is extremely useful in shared office buildings where some people use secure 13.56MHz smart cards and others use regular 125kHz cards.
  • Minimum wiring requirements
    A single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
  • Same design as IP intercoms
    The access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
  • Remote configuration and administration
    Thanks to IP technology, the access control unit can be administered remotely via a web interface You can also use 2N® Access Commander software or the 2N® Remote Configuration service to administer the unit.
  • Attendance terminal
    The 2N® Access Unit 2.0 operates as a basic access terminal recording the arrival and departure of employees. Information on attendance is subsequently displayed in the 2N® Access Commander software.
  • Protection against hackers
    With IK08 class protection, the access control unit is resistant to vandals and software hackers. It can resist dictionary attacks and supports the 802.1x protocol for authentication in the network.
  • Double-sided door security
    Add-on modules can be connected to the 2N Access Unit 2.0, e.g. an RFID exit reader or keypad, as well as a simple exit button to ensure the door is secured from both sides.
  • NFC support
    Thanks to support of NFC technology, as well as RFID cards, users can use their Android smartphone with the installed 2N® Mobile Key application to enter the building.
Show more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more
Typical Usage

2N Access Units 2.0 Introduction

Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Licenses

Find out the detailed description of product licensing policy.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 01287-001 (nickel) / 01288-001 (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 01278-001 (nickel) / 01279-001 (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 01284-001 Learn more
Backplate – 1 Module Order No.: 01293-001 Learn more
Gang Plate - 1 Module Order No.: 01524-001 Learn more

Extension Modules

Fingerprint Reader Order No.: 01276-001 Learn more
Keypad Order No.: 01253-001 (nickel) / 01254-001 (black) Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01639-001 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01638-001 Learn more
Bluetooth Reader Order No.: 01266-001 Learn more
Touch Keypad Order No.: 01277-001 Learn more
RFID Card Reader 125kHz Order No.: 01255-001 Learn more
RFID Card Reader 13.56MHz NFC Order No.: 01262-001 Learn more
Touch Display Order No.: 01275-001 Learn more
I/O Module Order No.: 01257-001 Learn more
Wiegand Module Order No.: 01259-001 Learn more
Extension Cable 1m Order No.: 01267-001 Learn more
Extension Cable 3m Order No.: 01268-001 Learn more
Extension Cable 5m Order No.: 01269-001 Learn more

Other Accessories

External IP Relay - 1 Output, 1 Input Order No.: 01397-001 Learn more
Magnetic Door Contact Order No.: 01388-001 Learn more
2N® 2Wire Order No.: 01404-001 Learn more
Security Relay Order No.: 01386-001 Learn more
EM4100 RFID Card, 125 kHz Order No.: 01395-001 Learn more
Mifare Classic 1k RFID Card, 13.56 MHz Order No.: 01384-001 Learn more
EM4100 RFID Fob, 125 kHz Order No.: 01396-001 Learn more
Mifare Classic 1k RFID Fob, 13.56 MHz Order No.: 01385-001 Learn more
External RFID Card Reader 125kHz (USB) Order No.: 01399-001 Learn more
External RFID Card Reader 13.56MHz + 125kHz (USB) Order No.: 01400-001 Learn more
External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 01527-001 Learn more

Power Supply

PoE Injector Order No.: 01403-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • Multi-frequency RFID card reader
    The combined RFID reader is extremely useful in shared office buildings where some people use secure 13.56MHz smart cards and others use regular 125kHz cards.
  • Minimum wiring requirements
    A single ethernet cable is all you need to ensure communication with the unit and power (PoE). You can also connect a door lock, exit button, door contact or motion sensor just as easily directly to the unit.
  • Same design as IP intercoms
    The access control unit will impress you with its elegant appearance, which has the same design as 2N IP intercoms. The unit comes in nickel or black and can be installed on the wall or flush mounted.
  • Remote configuration and administration
    Thanks to IP technology, the access control unit can be administered remotely via a web interface You can also use 2N® Access Commander software or the 2N® Remote Configuration service to administer the unit.
  • Attendance terminal
    The 2N® Access Unit 2.0 operates as a basic access terminal recording the arrival and departure of employees. Information on attendance is subsequently displayed in the 2N® Access Commander software.
  • Protection against hackers
    With IK08 class protection, the access control unit is resistant to vandals and software hackers. It can resist dictionary attacks and supports the 802.1x protocol for authentication in the network.
  • Double-sided door security
    Add-on modules can be connected to the 2N Access Unit 2.0, e.g. an RFID exit reader or keypad, as well as a simple exit button to ensure the door is secured from both sides.
  • NFC support
    Thanks to support of NFC technology, as well as RFID cards, users can use their Android smartphone with the installed 2N® Mobile Key application to enter the building.
Show more

Where to Sell

Take a look at the solutions where this product can be used.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing documentation
Request information