Skip to Content
2N

2N® Access Unit 2.0 Touch Keypad & RFID

2N® Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and touch keypad. The unit has a multi-frequency RFID card reader that allows using both older 125kHz cards and smart and secure 13.56MHz ones and thus covers functions of three separate access units. The device is intended for indoor and outdoor installations.

  • Transition to smart and secured cards
  • Smart automatic calibration
  • Two-factor authentication
Request information Where to buy
About

Features & Benefits

  • Transition to smart and secured cards
    Ensure a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, secure 13.56MHz technology without the need for a high one-time investment.
  • Smart automatic calibration
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • Two-factor authentication
    For an extra level of security, two-factor authentication can be set requiring users to confirm their identity by combining the RFID badge with a PIN code.
  • Remote configuration and management
    The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N® Access Commander for bulk management.
  • Easily installed edge device
    A single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
  • Silent alarm
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • Guaranteed visibility even at night
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • Notification of incorrect PIN entry
    If anybody repeatedly enters an incorrect PIN to get into the building, the 2N Access Unit immediately notifies the administrator and blocks the keypad.
  • Time & attendance terminal
    The 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
  • NFC support
    Thanks to wireless NFC technology, you can also easily open the door using a smartphone with Android OS and the 2N® Mobile Key application installed.
Show more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more
Typical Usage

2N Access Units 2.0 Introduction

Get to know the features, capabilities and unique benefits of multitechnology 2N IP access control readers.
Watch the video

Where to Buy

To purchase a product locally, please find an authorised distributor.
Locate a distributor
Technical area

Documents

Marketing materials

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Licenses

Find out the detailed description of product licensing policy.
See more

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Mounting Accessories

Frame for Installation on the Surface - 1 Module Order No.: 01287-001 (nickel) / 01288-001 (black) Learn more
Frame for Installation in the Wall - 1 Module Order No.: 01278-001 (nickel) / 01279-001 (black) Learn more
Box for Installation in the Wall - 1 Module Order No.: 01284-001 Learn more
Backplate – 1 Module Order No.: 01293-001 Learn more
Gang Plate - 1 Module Order No.: 01524-001 Learn more

Extension Modules

Fingerprint Reader Order No.: 01276-001 Learn more
Keypad Order No.: 01253-001 (nickel) / 01254-001 (black) Learn more
Bluetooth & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01639-001 Learn more
Touch Keypad & RFID Reader 125kHz, Secured 13.56MHz, NFC Order No.: 01638-001 Learn more
Bluetooth Reader Order No.: 01266-001 Learn more
Touch Keypad Order No.: 01277-001 Learn more
RFID Card Reader 125kHz Order No.: 01255-001 Learn more
RFID Card Reader 13.56MHz NFC Order No.: 01262-001 Learn more
Touch Display Order No.: 01275-001 Learn more
I/O Module Order No.: 01257-001 Learn more
Wiegand Module Order No.: 01259-001 Learn more
Extension Cable 1m Order No.: 01267-001 Learn more
Extension Cable 3m Order No.: 01268-001 Learn more
Extension Cable 5m Order No.: 01269-001 Learn more

Other Accessories

External IP Relay - 1 Output, 1 Input Order No.: 01397-001 Learn more
Magnetic Door Contact Order No.: 01388-001 Learn more
2N® 2Wire Order No.: 01404-001 Learn more
Security Relay Order No.: 01386-001 Learn more
EMarine RFID Card 125kHz Order No.: 01395-001 Learn more
Mifare RFID Card 13.56MHz Order No.: 01384-001 Learn more
EMarine RFID Key Fob 125kHz Order No.: 01396-001 Learn more
Mifare RFID Key Fob 13.56MHz Order No.: 01385-001 Learn more
External RFID Card Reader 125kHz (USB) Order No.: 01399-001 Learn more
External RFID Card Reader 13.56MHz + 125kHz (USB) Order No.: 01400-001 Learn more
External Secured RFID Card Reader 125kHz + 13.56MHz with NFC (USB) Order No.: 01527-001 Learn more

Power Supply

PoE Injector Order No.: 01403-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • Transition to smart and secured cards
    Ensure a step-by-step transition from obsolete, easy-to-copy 125kHz technology to a smart, secure 13.56MHz technology without the need for a high one-time investment.
  • Smart automatic calibration
    With regular automatic calibration, the unit reliably registers and evaluates each touch and prevents detection of unwanted or false touches (e.g. raindrops).
  • Two-factor authentication
    For an extra level of security, two-factor authentication can be set requiring users to confirm their identity by combining the RFID badge with a PIN code.
  • Remote configuration and management
    The 2N Access Unit 2.0 can be remotely configured via 2N® Remote Configuration cloud service or administrator can use 2N® Access Commander for bulk management.
  • Easily installed edge device
    A single ethernet cable, Power over Ethernet, and the option to connect a door strike, exit button, or door contact directly to the unit make installation very simple.
  • Silent alarm
    A unique code can be set on the unit that opens the door, but also triggers another action without warning the intruder, such as setting off an alarm at the building security control centre.
  • Guaranteed visibility even at night
    Thanks to backlighting with adjustable brightness, visibility of the keypad is ensured even at night or in places with minimal lighting.
  • Notification of incorrect PIN entry
    If anybody repeatedly enters an incorrect PIN to get into the building, the 2N Access Unit immediately notifies the administrator and blocks the keypad.
  • Time & attendance terminal
    The 2N Access Unit 2.0 works as a T&A terminal recording all your employees’ arrivals and departures. These information are sent to 2N® Access Commander where can be seen in graphical form.
  • NFC support
    Thanks to wireless NFC technology, you can also easily open the door using a smartphone with Android OS and the 2N® Mobile Key application installed.
Show more

Where to Sell

2N® Access Unit 2.0 Touch Keypad & RFID can be used throughout the public and private sectors to help increase physical security and improve your daily life. Choose the area of your interest.
Residential - Single House
Residential - Apartment Building
Commercial & Corporate Sector

Technical Parameters

Interfaces
Power supply: PoE and/or 12V/1A DC
PoE: 802.3af (Class 0–12.95W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12V DC/max 600mA
Passive switch: NO/NC contacts, up to 30V/1A AC/DC
Inputs: 2 inputs - in passive/active mode (-30V to +30V DC)
OFF = open or Uin> 1.5V
ON = short-circuit or Uin< 1.5V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA) and microphone
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID card reader
Supported frequencies: 125kHz and 13.56MHz
125kHz: EM4100, EM4102, HID Prox
13.56MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object)
Mechanical properties
Frame: robust zinc cast frame with surface finish (nickel and black colour)
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight: max 0.8kg
Cover rating: IP54 and IK08
Extension modules
2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID card readers, touch keypad, fingerprint, Bluetooth reader, I/O module, Wiegand, etc.
Show more

Documents

Marketing materials
Request information