2N® Access Unit 2.0 RFID 125 kHz

Order number: 02137-001

Do you have a project for modernising a house, including the access control? Do you want to remove the old controllers, simplify administration and at the same time allow residents to keep their old cards? Select our RFID reader for cards on a frequency of 125 kHz. You only need a UTP cable to connect it to the network and power supply. Forget about connecting with the controller. The unit is a smart device in its own right. Datasheets (EN)

Request information

Technical Parameters
Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies: 125 kHz variant
125 kHz: EM4100, EM4102, HID Prox
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.2 (W) x 5.11 (H) x 1.10 (D) inch
Flush mounting frame:
- 1 module: 5.11 (W) x 6.02 (H) x 0.19 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.25 (W) x 5.15 (H) x 1.77 (D) inch
Weight: max 1.76 pounds
Cover rating: IP54 and IK08
Show more