2N® Access Unit M RFID 13.56 MHz

Order number: 02305-001

This version of the 2N® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology. The reader supports NFC technology, so employees who don’t want to wear a card can use their mobile phone to gain access. Administer a unit remotely via the secure web interface or in the 2N® Access Commander software. Datasheets (US)

Request information

Technical Parameters
Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit M
Audio: buzzer, 1 W/8ohm
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies: 13.56 MHz variant (optionally secured)
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
Mechanical Properties
Cover: tempered glass with durable plastic
Operating temperature: -40°F to + 140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions (surface mounted): 1.969 (W) x 5.236 (H) x 1.063 (D) inch
Weight: max 1,1 pounds
Cover rating: IP55 and IK07
Show more