2N® SIP Audio Converter
Connect your Public Address to your telephone system and use it to make announcements via your mobile phone. 2N® SIP Audio Converter converts the sound from a SIP phone system to the classic analogue form so you can broadcast live or pre-recorded messages over the IP network to any distance.
- Two-way communicator
- Multicast broadcasting
- Built-in relay
- Technical area
- SW Applications
- Sales Area
Features & Benefits
Two-way CommunicatorUse the Converter with an external speaker as a simple Public Address system or with a microphone as a two-way communicator on the principle of a simple IP intercom.
Multicast broadcastingBroadcast to an unlimited number of end devices, all without burdening your LAN/WAN with redundant data-streams.
Built-in relayExternal devices can be controlled using the relay or you can use it as a priority switch (override mode).
Powerful amplifier2N® SIP Audio Converter has a built-in amplifier with an output of 2x10 W so it can easily be connected to a speaker without the need of an external amplifier.
CallingBy connecting a microphone and a switch button you can call up to three pre-set numbers.
Simple installation and configurationConnect the converter to an existing LAN/WAN network. The actual configuration of the device is performed in a clean web interface.
Informacast protocol supportThe Informacast protocol allows for spoken or sound recording play back from Cisco devices.
Integration into other systemsYou can easily integrate the 2N® SIP Audio Converter into third-party systems such as video monitoring systems or IP telephony.
|Amplifier outputs:||4x connector on the rear panel, STEREO/MONO with autodetect|
|Loudspeaker impedance:||4-8 Ω|
|Amplifier output:||Up to 2x10 W subject to connection type|
|Frequency range:||20 Hz – 20 kHz (+/- 0.5 dB)|
|Harmonic distortion:||0.05% @ 1 kHz|
|Signal-to-noise ratio:||91 dB|
|Status signalling:||3x RG LED on the front panel|
|Local control:||3x Button on the front panel|
|Remote control:||1 x Infrared sensor on the front panel|
|LAN connection:||RJ-45 connector on the back panel, 10/100BASE-TX with Auto-MDIX function|
|Headphone/Line output:||1x 3.5 mm STEREO jack on the front panel|
|Microphone/Line input:||1x 3.5 mm STEREO jack on the front panel|
|Power from an external source:||12 V DC / 1.8 A|
|Power over Ethernet:||PoE IEEE 802.3af|
|Output for add-on speakers|
|PoE:||1 x 4 Ohm (10W)
1 x 8 Ohm (10W)
2 x 4 Ohm (2x5W)
2 x 8 Ohm (2x5W)
|12V:||1 x 4 Ohm (18W)
1 x 8 Ohm (12W)
2 x 4 Ohm (2x10W)
2 x 8 Ohm (2x9W)
|Dimensions and weight|
|Dimensions:||4.134 x 1.339 x 3.386 inch|
|Dimensions (with L-profiles):||5.118 x 1.339 x 3.386 inch|
|Temperature range:||32°F – 122°F|