Skip to Content
2N

2N® SIP Mic

A SIP based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need of server or distance limitations.

  • Server-less paging to up to 12 zones
  • Two-way communication
  • Pre-recorded announcements
Request information Where to buy
About

Features & Benefits

  • Server-less paging to up to 12 zones
    2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
  • Two-way communication
    Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
  • Pre-recorded announcements
    Upload or record a message via the microphone and then play it by simple push of a button to a designated zone.
  • Easy configuration
    Zones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
  • Integration with an AXIS solution
    The 2N® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix®, announcements can be made using AXIS cameras or speakers.
  • Easy installation with a single cable
    The 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
  • Listen-in function
    At simple press of a button one can listen to what is happening in certain zone.
  • Support for IP PBX (SIP)
    The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
Show more

Compatibility with Global Technology Partners

Get to know the wide range of technologies which are compatible with our products.

Technical Parameters

Audio parameters
Audio stream: SIP2.0, RTP multicast, VAPIX®
Audio codecs: G.711u, G.722, L16
Speakers: 2 build-in, stereo, power output 2x1W
Interfaces
Logical inputs: 2, galvanically separated, sensitive to contact or voltage from 5 to 48V
Relay output: 1, galvanically isolated, NO and NC contact, max load 48V, 1A
Headphone output: 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB
Primary microphone input: symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Headset microphone input: 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input: 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB
Power supply
External power supply: 12 to 32V, power draw max. 1A
Power over Ethernet: PoE to 802.3af standard
Mechanical properties
Dimensions: 209 x 65 x 143mm
Operating temperature: 0°C – 40°C
Buttons and labels
Label dimensions: 39.6mm width x 9mm height
Double button: 28mm x 14mm
Single button: 14mm x 14mm
Smal buttons: 9mm x 9mm
Show more
Typical Usage

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Marketing documentation
Software & firmware

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Compatibility with Global Technology Partners

Get to know the wide range of technologies which are compatible with our products.

Technical Parameters

Audio parameters
Audio stream: SIP2.0, RTP multicast, VAPIX®
Audio codecs: G.711u, G.722, L16
Speakers: 2 build-in, stereo, power output 2x1W
Interfaces
Logical inputs: 2, galvanically separated, sensitive to contact or voltage from 5 to 48V
Relay output: 1, galvanically isolated, NO and NC contact, max load 48V, 1A
Headphone output: 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB
Primary microphone input: symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Headset microphone input: 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input: 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB
Power supply
External power supply: 12 to 32V, power draw max. 1A
Power over Ethernet: PoE to 802.3af standard
Mechanical properties
Dimensions: 209 x 65 x 143mm
Operating temperature: 0°C – 40°C
Buttons and labels
Label dimensions: 39.6mm width x 9mm height
Double button: 28mm x 14mm
Single button: 14mm x 14mm
Smal buttons: 9mm x 9mm
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Power Supply

2N IP Audio Power Supply Order No.: 01435-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • Server-less paging to up to 12 zones
    2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
  • Two-way communication
    Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
  • Pre-recorded announcements
    Upload or record a message via the microphone and then play it by simple push of a button to a designated zone.
  • Easy configuration
    Zones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
  • Integration with an AXIS solution
    The 2N® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix®, announcements can be made using AXIS cameras or speakers.
  • Easy installation with a single cable
    The 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
  • Listen-in function
    At simple press of a button one can listen to what is happening in certain zone.
  • Support for IP PBX (SIP)
    The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
Show more

Compatibility with Global Technology Partners

Get to know the wide range of technologies which are compatible with our products.

Technical Parameters

Audio parameters
Audio stream: SIP2.0, RTP multicast, VAPIX®
Audio codecs: G.711u, G.722, L16
Speakers: 2 build-in, stereo, power output 2x1W
Interfaces
Logical inputs: 2, galvanically separated, sensitive to contact or voltage from 5 to 48V
Relay output: 1, galvanically isolated, NO and NC contact, max load 48V, 1A
Headphone output: 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB
Primary microphone input: symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Headset microphone input: 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input: 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB
Power supply
External power supply: 12 to 32V, power draw max. 1A
Power over Ethernet: PoE to 802.3af standard
Mechanical properties
Dimensions: 209 x 65 x 143mm
Operating temperature: 0°C – 40°C
Buttons and labels
Label dimensions: 39.6mm width x 9mm height
Double button: 28mm x 14mm
Single button: 14mm x 14mm
Smal buttons: 9mm x 9mm
Show more

Documents

Marketing documentation
Software & firmware